JACKS SHED.

mayfly · Posted: Sun Aug 23, 2009 8:36 pm Post subject: OLD RACING BIKE..................

I dont suppose anyone has got an old racing bike or an old mountain bike lying around rusting. Im after the spokes of the wheels. preferably a racing bike off around 30 inch frame, or bigger as they have the longer and thicker spokes, should be around 300 mm in length.
_________________

TARA · Posted: Mon Aug 24, 2009 7:10 am Post subject:

Have you tried registering on your local Freecycle ?
You can get loads of bargins on there.

Tara.
_________________

Get a life, Get out in the country.

fish · Posted: Mon Aug 24, 2009 8:00 am Post subject:

mate ille send some spokes up with the ali blocks!
_________________

mayfly · Posted: Mon Aug 24, 2009 8:19 am Post subject:

tyke

Twiggy · Posted: Mon Aug 24, 2009 4:04 pm Post subject:

Tealers?

fish · Posted: Mon Aug 24, 2009 5:17 pm Post subject:

mini xbow bolts for cats?lol
_________________

mayfly · Posted: Mon Aug 24, 2009 8:26 pm Post subject:

ok, i'll tell you all. PIGEON BOUNCER WIND SPREADERS, the spokes on the racing bikes are long Enough and are threaded at one end so you can secure them to an UDHDT PIECE OF PLASTIC, When i can locate some off that as well, have a look at the pics and you will see what im on about.

Frontal view of the block, behind the rubber grommets are the 2 to3mm nuts.

this pic shows the wire bent at a 90 degree angle going through the block, and held on the other side by a 2 to 3mm nut, hence the spokes, they are the same thread and length, preferably wire about 300 to 320 mm, bike spokes perfect for the job.

_________________

mr=punch · Gamekeepers nightmare! yes Joined: 26 Jul 2008 Posts: 280

Can I have a pic of the whole thing please.

thanks

mayfly · Posted: Tue Aug 25, 2009 4:41 pm Post subject:

HERE YA GO .....

_________________